.

Relays and Electronic Control Modules

KAT Electronic Control Modules are specially designed to operate under severe conditions of transportation industries, agriculture and construction vehicles.

KAT Relays and Electronic Control Modules consist of a software, which works together with the custom designed electronic card for controlling different functions in vehicles.

It has appropriate plug structure to KFZ relay sockets standard in vehicles.

 

23A Electronic High Current Relay

In case of high currents due to a short circuit or malfunction of the electrical components of the vehicle, the control module detects a hardware error and turns off outputs according to the mode specified in software and alerts the driver.  There is embedded software in the module.

Reverse warning buzzer control module

With the vehicle taken to reverse gear, the voltage input module coming to unit input is activated, and it allows the operation of the warning system in the vehicle. There is embedded software in the module.

Generator Control Module

It is the module used for controlling Bosch brand generators, which are used for feeding the air conditioner in buses. The module is shipped as calibrated. In case battery supply is below the determined calibration values, the generators connected to the module output are activated. There is embedded software in the module.

Battery Control Module

It is the module used to control battery level in vehicles. If the battery level is critically low to prevent the operation of the vehicle, the driver is alerted by module output.    The battery internal resistance and voltage level are measured, and a warning signal is given. There is embedded software in the module.

Windscreen Wiper Control Module

It is the module, which allows the operation of wipers as continuous (normal) , continuous (fast) and intermittent according to the wiper position of the vehicle. There is embedded software in the module.

 

sssProduct Specifications

  • Operating Temperature :-40°C / +85°C
  • OP Rating : IP54
  • Operating Voltage :16V / 32V
  • EMC-Norm :M3285 (Rev. 07/2008)
  • MAN-Norm :M3499 (Rev. 08/2008)